What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 01.07.2025 15:56

[image of Common-mode choke]
[old diagram got deleted by accident]
A fuse is a non-resetable over current circuit protector.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Barnstars:
White House Walks Back U.S.-Built LNG Carrier Ambitions - The Maritime Executive
These are simplified answers to the original question, and does not change anything I wrote above.
It also is a device that limits the change in current flow.
Edit 2024–10.
Baker Mayfield for MVP? Josh Jacobs for OPOY? Long-shot picks for major NFL awards in 2025 - NFL.com
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Demand in the Housing Market Just Got Even Worse, as Supply Piles Up - Wolf Street
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is 'the assistant's answer'
Is it true that all men want a woman who looks like an Instagram “model”?
(Dc diagram shown, AC is similar).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
These devices are installed between the “hot” and “neutral” and protective ground.
An AC voltage/ current source, and an ac inductive load.
It seems Mohan does not understand the difference between a comment and an Answer.
The other is “what does a “fuse” do?”
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
I post the exact comment here.
But… the neutral is now “floating” because of the 1 ohm resistance.
eight
so, what happens?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
At one ohm, the resistor has a maximum of 1 watt power.
This is where this question deviates from being a 'generic' question, and becomes more specific.
what exactly is a ‘surge’ protector?
He then describes the function of a fuse.
The third is lightning and “how it gets conducted into a home.”
At least they know the answer if they wanted it.
but I think this circuit , shows a few more pieces.
nine
When will dating stop being so hard for Gen Z?
This is where the MOV conducts again, and dissipated the energy.
Now when you have a certain ac resistance, then a current flows in a loop.
Because the load is inductive, the current lags the voltage.(by a bit).
Which Korean female celebrities look the best in a bikini?
He then describes Rainy Season and Lightning.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
One
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Why do Trump supporters like Andrew and Tristan Tate?
a photo is worth a thousand words.
He then asserts :
One is “what exactly is in a ‘surge protector’ ? ”
For this case there are devices called Metal oxide varistors (MOV).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
First Sentence:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
the problem then depends on "how fast does the fuse operate?".
There are three different concepts here that are getting confused.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There are two important concepts here.
2024–10–16 [ OO OLAOYE OYEBODE ]
A circuit breaker is similar, but is resettable.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
What is lightning?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
In schematic diagrams this is the symbol for a fuse:
Here is a simplified AC power diagram.
This device then solves the entire problem.
But it can get overloaded, and no longer works.
The MOV will conduct when the voltage exceeds 50% of line voltage.
The bolt then partially travels down the line to your home.
Upvotes:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What does a fuse do?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This one hit behind the barn.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–10[John johnson John Johnson ]